Belt Grinders - Arms for Rectifying Turbines

Arm operating 6mm wide belt

Slim line arm used for working into tight slots, restricted areas and inside corners.

Arm 50002 operates 6mm wide x 610mm long belts

Single sided arm operating 6/12mm wide belts

Single sided wheel, single sided arm.

50072U19SSHP 0perates 6/12mm wide x 610mm arm with single sided hard wheel
50072U19SSSP 0perates 6/12mm wide x 610mm arm with single sided soft wheel

Arm operating 12mm wide belt

Small steel wheel, slimline machined arm to increase access. Used for working into slots and general restricted areas.

50012T 0perates 12mm wide x 610mm arm

Single sided arm operating 6/12mm wide belts

"Aeroplane tyre" wheel, single sided arm.

50072SSHP operates 6/12mm wide x 610mm arm with
hard neoprene wheel
50072SSSP operates 6/12mm wide x 610mm arm with
soft neoprene wheel

Single sided arm operating 12mm wide belt

Flat wheel, single sided arm.

50072SSFHP operates 12mm wide x 610mm arm with hard neoprene flat wheel
50072SSFSP operates 12mm wide x 610mm arm with soft neoprene flat wheel

Single sided arm operating 12mm wide belt

Shaped wheel, single sided arm.

50022SSH operates 12mm wide x 610mm arm with hard neoprene shaped wheel
50022SSS operates 12mm wide x 610mm arm with soft neoprene shaped wheel

A range of arm attachments to enable grinding and polishing of difficult to access areas. "Single sided arm" enables abrasive belts to work right up against an edge.