Belt Grinders - "Beltafile" Pneumatic

BF20

Very cost effective. Now everyone can afford a Beltit. No workshop can possibly be without one. 1.15kg, yellow motor, standard mechanism. BF 20 and 20S have more powerful motors for heavier grinding work.

Operates 3,6,12, & 20 mm wide belts (Group A arms)

Beltit Beltafile	RPM @ 90 PSI (6.12 bar) no load	Air consumption Ltrs. per minute for max. performance and continuous running	Belt surface speed, metres per second	Sound levels at 90 PSI (6.12 bar) 1.5 metres from Beltit Leq dB (A)	Hand- arm vibration level inms2 r.m.s frequency- weighted vibration in the worst axis
BF20	17,000	679 (24 CFM)	28	79.5	Less then 2.5

Note 1: All performance figures are average readings.

Note 2: Sound level readings were taken without abrasive belts as the wide range of abrasive grits and backings have varying effect on the readings.

Note 3: Vibration levels measured under working conditions grinding a block of steel, using an abrasive belt 19 x 533mm Aluminium Oxide, P80 at 90PSI (6.12 bar).

Note 4: Sound and vibration levels certified by the Institute of Sound and Vibration Research at the University of Southamption in the UK.