Belt Grinders - Heavy Duty Electric

E240AHD & E240AHDVA

E110AHD & E110AHDVA

E240A-HD-VA & E110A-HD-VA (vacuum assisted dust collecting)

Suitable for heavy stock removal, and heavy work. Fitted with 1100 watt - 240V/110V motor, standard duty mechanism, support bar and U handle. (Support bar provides maximum protection to mechanism)

Select arms from largest choice, 3,6,12,19 mm wide belts + 25 mm wide belts (Group C arms).

Select this tool for heavy duty grinding.

Performance figures for the electric heavy duty beltit and its  dust collecting (VA) version

Beltit

RPM 
no load

Voltage

Power

Belt surface
speed,
(metres per
second)

Sound levels
1.5 metres
from Beltit

Hand-arm
vibration level in
ms2 r.m.s.
frequency- weighted
vibration in the
worst axis

E240AHD

9,600

240 V AC

1,100 W

17.9

78 Leq dB(a)

Less than 2.5

E240AHDVA

 

50 Hz

 

 

 

 

E110AHD

9,600

110 V AC

1,100 W

17.9

78 Leq dB(a)

Less than 2.5

E110AHDVA

 

50 Hz

 

 

 

 

Note 1: All performance figures are average readings.

Note 2: Sound level readings were taken without abrasive belts as the wide range of abrasive grits and backings have varying effect on the readings.

Note 3: Vibration levels measured under working conditions grinding a block of steel, using an abrasive belt 25 x 610mm Aluminium Zirconia, P36 at 90PSI (6.12 bar).

Note 4: Sound and vibration levels certified by the Institute of Sound and Vibration Research at the University of Southamption in the UK.