Belt Grinders - Heavy Duty Pneumatic

HD & HDVA

HD -VA (vacuum assisted - dust collecting)

Suitable for heavy stock removal, continuous and heavy work, i.e heavy fabricators, pressure vessels, ship building. Fitted with 2.685 kg, blue motor, standard duty mechanism, support bar and U handle. (Support bar provides maximum protection to mechanism)

Select arms from largest choice, 3,6,12,& 19 mm + 25mm wide belts (Group C arms). Select this tool for heavy duty grinding.

Performance figures for the Pneumatic Heavy Duty Beltit and its dust collecting (VA) version

Beltit	RPM @ 90 PSI (6.12 bar) no load	Air consumption Ltrs. per minute for max. performance and continuous running	Belt surface speed, metres per second	Sound levels at 90 PSI (6.12 bar) 1.5 metres from Beltit Leq dB (A)	Hand-arm vibration level in ms2 r.m.s. frequency- weighted vibration in the worst axis
HD	15,500	876 (31CFM)	28.3	79.4	Less than 2.5
HDVA	14,000	864 (30CFM)	25	76.7	Less than 2.5

Note 1: All performance figures are average readings.

Note 2: Sound level readings were taken without abrasive belts as the wide range of abrasive grits and backings have varying effect on the readings.

Note 3: Vibration levels measured under working conditions grinding a block of steel, using an abrasive belt 25 x 610mm Aluminium Zirconia, P36 at 90PSI (6.12 bar).

Note 4: Sound and vibration levels certified by the Institute of Sound and Vibration Research at the University of Southamption in the UK.