Belt Grinders - Standard Pneumatic

SD & SDVA

SD -VA
(vacuum assisted - dust collecting)

A popular choice of Beltit which can be fitted onto a bench mounted stand. Red motor, standard mechanism, knob handle.

Operates, 3,6,12,& 19 mm wide belts (Group C arms)

Performance Figures for the Standard Duty Beltit and its Dust Collecting (VA) Version

Beltit	RPM @ 90 PSI (6.12 bar) no load	Air consumption Ltrs. per minute for max. performance and continuous running	Belt surface speed, metres per second	Sound levels at 90 PSI (6.12 bar) 1.5 metres from Beltit Leq dB (A)	Hand-arm vibration level in ms2 r.m.s. frequency- weighted vibration in the worst axis
SD	14,000	595 (21 CFM)	25	73.7	Less thsn 2.5
SDVA	13,000	510 (18 CFM)	23.3	69.2	Less thsn 2.5

Note 1: All performance figures are average readings.

Note 2: Sound level readings were taken without abrasive belts as the wide range of abrasive grits and backings have varying effect on the readings.

Note 3: Vibration levels measured under working conditions grinding a block of steel, using an abrasive belt 19 x 533mm Aluminium Oxide, P80 at 90PSI (6.12 bar).

Note 4: Sound and vibration levels certified by the Institute of Sound and Vibration Research at the University of Southamption in the UK.