Belt Grinders - Pneumatic beltit "Single Handed"

SH & SHVA

SH -VA (vacuum assisted - dust collecting)

Most Popular model in car plants and sheet metal indusry. 1.395 kilogram, green motor, standard mechanism.

Select from a very wide range of arm options, operating 3,6,12,& 19 mm wide belts (Group B arms)

Performance Figures for the Single Handed Beltit and its Dust Collecting (VA) Version

Beltit	RPM @ 90 PSI (6.12 bar) no load	Air consumption Ltrs. per minute for max. performance and continuous running	Belt surface speed, metres per second	Sound levels at 90 PSI (6.12 bar) 1.5 metre from Beltit Leq dB (A)	Hand-arm vibration level in ms2 r.m.s. frequency- weighted vibration in the worst axis
SH	14,000	595 (21 CFM)	25	75.2	Less thsn 2.5
SHVA	13,000	510 (18 CFM)	23.3	69.2	Less thsn 2.5

Note 1: All performance figures are average readings.

Note 2: Sound level readings were taken without abrasive belts as the wide range
of abrasive grits and backings have varying effect on the readings.

Note 3: Vibration levels measured under working conditions grinding a block of steel, using an abrasive belt 19 x 533mm Aluminium Oxide, P80 at 90PSI (6.12 bar).

Note 4: Sound and vibration levels certified by the Institute of Sound and Vibration Research at the University of Southamption in the UK.