Electric Band-it

Powerful heavy duty motors. Strong and reliable tools, offering peak performance. Extremely high torque produced by a 4000 rpm, 1200W motor, 110V & 240V options are available.

Performance figures for the electric band-it

Multi Band-it models

RPM light load

Voltage

Power

Belt surface speed (meters per second)

Sound level 1.5 meters from Band-it

Hand-arm vibration level in m/s² r.m.s. frequency- weighed vibration in the worst axis.

E2462001
E1662001

4,000

110V / 240V, 50/60Hz

1,200 W

26.3

83 dB

2.5

E2462008
E1662008

4,000

110V / 240V, 50/60Hz

1,200 W

26.3

83 dB

2.5

E2462000
E1662000

4,000

110V / 240V, 50/60Hz

1,200 W

26.3

83 dB

2.5

E2462000-VA
E1662000-VA

4,000

110V / 240V, 50/60Hz

1,200 W

26.3

83 dB

2.5

Note 1: All performance figures are average readings, taken by Seco Engineering Co Ltd. under working conditions on a steel plate, with light load as wheel should not be run free.

Note 2: Sound level readings were taken be Seco engineering Co. Ltd, under working conditions grinding a block of steel using abrasive bands.

Note 3: The same motors are used on both the standard and dust collecting Band-its. To obtain the performance figures, the motors are assembled onto either the standard or the VA shrouds.

Note 4: These electric Band-its have been individually tested for vibration. See EC Declaration of Conformity for the reading.

Note 5: Vibration levels have been measured under working conditions by grinding a block of steel using an inflatable rubber tyre and 240 grit aluminium oxide belts. Checked by Seco Engineering Co. Ltd