Pneumatic Beltit Rollers and Universal Roller

The Beltit rollers are used for strait line finishing and blending. With a ripple free, smooth linear action they are perfect for stainless steel rectification. All models have dust collecting features reducing the hazards of working harmful composites. The Beltit Rollers have variable speed control.

Performance figures for pneumatic beltit rollers and the universal roller

Pneumatic Roller models	RPM no load	Air consumption Ltrs per minute for max performance and continuous running.	Belt surface speed (meters per second)	Sound level 1.5 meters from Roller	Hand-arm vibration level in m/s² r.m.s. frequency-weighed vibration in the worst axis.
RO-U100	4,200	171	13.3	78 dB	2.5
RO-SD	5,800	510	18.2	80 dB	2.5
RO-MD	6,800	678	21.3	80 dB	2.5
RO-HD	7,800	864	24.5	80 dB	2.5

Note 1: All performance figures are average readings, taken by Seco Engineering Co Ltd. under working conditions on a steel plate, with light load as wheel should not be run free.

Note 2: Vibration levels have been measured under working conditions by grinding a block of steel, using a soft roller and 240 grit aluminium oxide belts. Checked by Seco Engineering Co. Ltd.

Note 3: Sound levels for the motor units certified by the Institute of Sound and Vibration Research at the university of Southampton in the UK. Noise level from the drive belt and roller is less than that caused by the motor.