Belt Grinders - MS Pneumatic

MS & MSVA

Dust collecting model available

For continuous, high quantities of work. 2.0 kg, blue motor, standard mechanism, knob handle.

Select arms from largest choice; 3,6,12,& 19 mm + 25mm wide belts (Group C arms). Can operate 50102/50103 straight line heavy duty arm and 50202POL/50203POL pipe polishing arms. Heavy Duty grinding arms with serrated wheels should be operated by Heavy Duty Beltits.

Performance Figures for the Pneumatic Medium Standard Beltit and its Dust Collecting (VA) Version

Beltit	RPM @ 90 PSI (6.12 bar) no load	Air consumption Ltrs. per minute for max. performance and continuous running	Belt surface speed, metres per second	Sound levels at 90 PSI (6.12 bar) 1.5 metres from Beltit Leq dB (A)	Hand-arm vibration level in ms2 r.m.s. frequency- weighted vibration in the worst axis
MS	15,500	876 (31CFM)	28.3	79.4	Less than 2.5
MSVA	14,000	864 (30CFM)	25	76.7	Less than 2.5

Note 1: All performance figures are average readings.

Note 2: Sound level readings were taken without abrasive belts as the wide range of abrasive grits and backings have varying effect on the readings.

Note 3: Vibration levels measured under working conditions grinding a block of steel, using an abrasive belt 19 x 533mm Aluminium Oxide, P80 at 90PSI (6.12 bar).

Note 4: Sound and vibration levels certified by the Institute of Sound and Vibration Research at the University of Southamption in the UK.