Belt Grinders - Arms Group B

Universal (SH) Beltit Arm Attachments

Arm operating 6mm wide belt

Slim line arm used for working into tight slots, restricted areas and inside corners.

Arm 50001B operates 6mm wide x 533mm long belts

Arm operating 12mm wide belt

Slim line arm used for working into slots and general restricted areas.

Arm 50011B operates 12mm wide x 533mm long belts
Arm 50012B operates 12mm wide x 610mm long belts

Arm operating 12mm wide belt

Slim line arm for use on the pad or for working on the wheel to obtain a smoother finish than the 50011B & 50012B arms.

Arm 50021B operates 12mm wide x 533mm long belts
Arm 50022B operates 12mm wide x 610mm long belts

Arm operating 6mm wide belt

Use for channels and restricted areas.

Arm 50031B operates 6mm wide x 533mm long belts

Arm operating 12mm wide belt

Use for stock removal and to minimise wear on the wheel.

Arm 50041B operates 12mm wide x 533mm long belts

Arm operating 12mm wide belt

Standard 12mm arm – general purpose. Grind, deburr, splatter remove, polish and finish. For use on wheel or platen pads. Reverse arm to give choice of platen pads (cork for grinding, rubber for finishing).

Arm 50051B operates 12mm wide x 533mm long belts
Arm 50052B operates 12mm wide x 610mm long belts

Longer arms for areas of difficult access; perfect finishing and internal grinding of square and round tubes.

Arm 50053B operates 12mm wide x 760mm long belts
Arm 50054B operates 12mm wide x 865mm long belts

Arm operating 12mm wide belt

Boomerang, use for straight line graining and grain rectification. Angle arm for stop/start and ripple free dressing of light butt welds, machined faces and polished surfaces.

Arm 50051BOB operates 12mm wide x 533mm long belts
Arm 50052BOB operates 12mm wide x 610mm long belts

Arm operating 12mm wide belt

Use for heavier work than the 50051B. Larger wheel for better support. Quicker removal. May be restricted in tight areas.

Arm 50061B operates 12mm wide x 533mm long belts

Arm operating 6mm wide belt

Dressing tight areas without damage to parent material and blending internal radii.

Arm 50071B operates 6mm wide x 533mm long belts
Arm 50072B operates 6mm wide x 610mm long belts

Arm operating 3mm wide belt
(also operates 12mm wide belts)

Grind & finish; Narrow small welds; internal radii; tight angles. Driven wheel shaped to a V, gives excellent tracking to a 3mm belt. Allows for very neat dressing of welds.

Arm 50071VB operates 3mm wide x 533mm long belts – V wheel
Arm 50072VB operates 3mm wide x 610mm long belts – V wheel

Arm operating 6mm and 12mm wide belt

Grind, shape & finish; welds; internal and multi radii pipes; 32mm dia. Wheel allows 12mm belts to wrap around to grind and polish outer diameter of pipes, avoiding flats.

Arm 50071U32HB operates 6/12mm wide x 533mm long belts
Arm 50072U32HB operates 6/12mm wide x 610mm long belts

Arm operating 6mm and 12mm wide belt

Use for blending internal radii and stock removal on the wheel. Outside radiusing with 12mm belt behind wheel on slack of belt to produce flat free finish.

Arm 50081B operates 6/12mm wide x 533mm long belts
Arm 50082B operates 6/12mm wide x 610mm long belts

Arm operating 19mm wide belts

Grind & finish; Stock removal; Working large areas; Reverse arm to give a choice of platen pads (cork for grinding, rubber for finishing).

Arm 50091B operates 6/12mm wide x 533mm long belts,
Rubber wheel 25.0D, 15.0W
Arm 50092B operates 6/12mm wide x 610mm long belts,
Rubber wheel 25.0D, 15.0W

Arm 50091U19B operates 6/12mm wide x 533mm long belts,
Urethane wheel 19.0D, 15.0W
Arm 50092U19B operates 6/12mm wide x 610mm long belts,
Urethane wheel 19.0D, 15.0W

Arm 50091U25B operates 6/12mm wide x 533mm long belts,
Urethane wheel 25.0D, 15.0W
Arm 50092U25B operates 6/12mm wide x 610mm long belts,
Urethane wheel 25.0D, 15.0W