SH Universal Electric - Performance Figures

SH24 & SH11

 

Performance Figures for the Universal Electric Beltit

Beltit	RPM no load	Voltage	Power	Belt surface speed, (metres per second)	Sound levels 1.5 metre from Beltit	Hand-arm vibration level in ms2 r.m.s. frequency- weighted vibration in the worst axis
SH24	9,600	240 V AC 50 Hz	1,100 W	17.9	78 Leq Db (A)	Less than 2.5
SH11	9,600	110 V AC 50 Hz	1,100 W	17.9	78 Leq Db (A)	Less than 2.5

Note 1: All performance figures are average readings.

Note 2: Sound level readings were taken without abrasive belts as the wide range of abrasive grits and backings have varying effect on the readings.

Note 3: Vibration levels measured under working conditions grinding a block of steel, using an abrasive belt 19 x 533mm Aluminium Oxide, P80 at 90PSI (6.12 bar).

Note 4: Sound and vibration levels certified by the Institute of Sound and Vibration Research at the University of Southamption in the UK.